Description

Ebara Optima Pump with 10m cable

Submersible electric pump for clear water with AISI 304 stainless steel hydraulics.
Pump body, intake grille, seal holder disc, and motor casing are in AISI 304. The impeller in PPE + PS
reinforced with glass fibers, and shaft in AISI 303.
The mechanical seal is standard (Ceramic/Carbon/NBR)
– MA version (fig.1) with float
– MS version (fig.3) with MS vertical magnetic float with reduced dimensions for clean water

Accessories
• 1″¼ hose connector and the relative hose clamp (optional)
• Minimum suction device up to 3 mm (fig. 2)

• Total head from 1.5 to 7.6 m
• Capacity from 1.2 to 9 m3
• Maximum immersion 5 m
• Maximum liquid temperature 50°C
• Maximum solid size passage 10 mm

INSTALLATION
The OPTIMA electric pumps have a wide versatility of installation. The possibility of choosing
between the vertical magnetic float (small) or the float switch allows choice of the best option,
also based on the space available to insert the pump. Furthermore, the choice of switch type also
depends on the water level for which pump start is preferred.

MS magnetic float (vertical)
It allows the use of floating
pumps where space is limited
(not compatible with low suction
device)

Low suction device
It allows aspiration to 3 mm from the
ground (only for M and MA version).
Easily mountable with the simple pressing